|
|
Modeling of flow on synchronous generator
Chlup, Jaroslav ; Skalka, Miroslav (referee) ; Janda, Marcel (advisor)
This project deals with simulation´s possibilities of air flow in electric machines. A finite element method is the final element technique. Aim of this project is conversion universal formula for calculation friction dissipation factor. For its location is necessary to create 27 simulations according to the 2. plan order. Usage programme MATLAB for processing results obtain requisite algorithm for calculation friction dissipation factor.
|
|
|
Influence of skin effect, proximity effect and air gap on winding losses of HF inductors and transformers
Pitner, Tomáš ; Cipín, Radoslav (referee) ; Martiš, Jan (advisor)
The bachelor's thesis deals with power losses in the windings of high-frequency inductors and transformers. A detailed mathematical and qualitative analysis of the skin effect, proximity effect and leakage flux of air gap is performed, supplemented with the results of computer simulations using the finite element method. The thesis introduces analytical and numerical methods for calculating power losses in the windings of inductors and transformers and describes suitable measurement methods, which are further used in the thesis. For selected geometries of inductors and transformers, AC resistances of their windings are calculated using FEM and the results are compared with measurements on constructed prototypes. The winding geometries are also compared between each other.
|
|
|
Assessment of ventilated floors construction
Jurka, Jiří ; Kmínová,, Hana (referee) ; Šilarová,, Šárka (referee) ; Šťastník, Stanislav (referee) ; Škramlik, Jan (advisor)
Air insulation, especially its efficiency, is often underestimated and most often it is recommended as combination of several methods by our experts. It is known that flowing air used to eliminate excessive humidity in lower construction is insignificantly promoted. Already our ancestors in ancient Rome had experience with implementation of air insulations. However, nowadays such design is connected with many doubts and it forces us to use sense, especially knowledge of construction physics. So it urges higher technical precision when designing functional ventilation system. Each building is actually a unique object, with regard to its position and used properties, that is why certain natural conditions must be accepted when designing. It is more complicated and figuratively speaking it can be written in c. 20 equations of twenty unknowns. Other problems arise in unknown coefficients to individual parameters and their effects. From another point of view it is the issue of changing air during the day, passing fronts, annual cycles and all of these in relation to internal environment of the building, materials used in the construction, land properties of rocks, and last but not least, relation to the terrain around the building. Then there are the effects of the building's altitudes etc. In total they are cycles with sine character of dampening and drying. The thesis discusses how to test the functionality of AIR insulations designed for the floor ventilation in historic buildings and follows on from the previously published articles. A flow analysis is being performed on an object of the city of Žirovnice which has been registered in the list of cultural monuments and was built as a brewery in the years 1589-1592 on the site of an older medieval building. This article brings new air-flow element. The aim of the article is to analyse in detail the air flow in a specific floor void with the aid of modern CFD programs and experimental measurements using the ALMEMO
|
|
| |
|
|
Administrative building Brno Hlinky, implementation of facade and roof cladding
Dušková, Lucie ; Liška, Pavel (referee) ; Kovářová, Barbora (advisor)
The subject of this Bachelor thesis is offering solution of technological steps roofing and cladding of an office building in Brno, Hlinky. It is a two storey building, partial basement, the overall module dimensions 9.4 x 37.5 m. Main supporting skeleton consists of roof trusses and ceiling beams that are attached to poles. The roof is purlin, load-bearing layer is trapezoidal sheet, which is on the top flange purlins. The walls are self-supporting, walled. Roof cladding is insulated with layer of polystyrene, the main waterproofing layer is mPVC film. Most of the cladding is designed as external thermal insulation composite systems with ceramic tiles, part of the facade on the west side of the building is made up of wood paneling with an air gap.
|
|
| |
|
|
FEA modelling of synchronous machine
Ficza, Tibor ; Kurfűrst, Jiří (referee) ; Ondrůšek, Čestmír (advisor)
Táto práca sa zaoberá s modelovaním synchronného stroja s permanentnými magnetmi pomocou metody konečných prvkov. K modelovaniu sme si zvolili 3 fázový synchronný stroj s permanentnými magnetmi na povrchu rotora z firmy VUES. Najprv vypočítame parametre stroja a potom spravíme statický model pomocou programu FEMM a Matlab a budeme hladať možné riešenia na 2D dynamický model. Pomocou programu Ansys Workbench spravíme 3D model tohoto stroja budeme a porovnávať výsledky simulácie.
|
|
|
Electromagnetic damper
Mikyska, Jan ; Huzlík, Rostislav (referee) ; Ondrůšek, Čestmír (advisor)
This master´s thesis is focused on obtaining electrical energy from vibration control car using electromagnetic dampers. The primary use of the electromagnetic damper is the production of electrical energy, which can then be used to power electrical appliances in your car or battery charging. The thesis is divided into six main parts: a literature review of possible ways of getting electricity from the car damping, theoretical and mathematical analysis of problems, the choice of design with computational analysis of dampers and power calculation.
|
|
| |
|
|
Study efficiency of modern thermal insulation for buildings
Šot, Petr ; auditor, Karel Trojan, Brno, energetický (referee) ; Šťastník, Stanislav (advisor)
The bachelor´s thesis deals with the problem of thermoreflect insulation. The small part of thesis focuses on the energy demand of buildings and its problems. Then the greater extent is analysed problems by heat transfer of material. It includes effects arising from the individual methods of heat transfer and defines the level of expression of individual methods of heat transfer in materials. The thesis presents an overview of experimental methods for determining thermal insulating properties of insulators. Then there is shown a selection of the most widespread insulation materials used in today´s construction. It includes the division of insulators in terms of used materials and subsequent classification of the most used materials in these groups. Another part of thesis deals with the thermoreflect isolation. There are mentioned the necessary concepts for the study of thermoreflect thermal insulation, which include the emissivity surface, the coefficient of mutual radiation and translucency of the material. Then there is described the method heat transfer of thermoreflect isolation. On the next there are presented experimental methods of determining thermal insulating properties thermoreflect thermal-insulating material. The thesis also includes a practical part, which contains the measurement results on a small range of samples taken termoreflection insulators. In the end there is mentioned a brief realization of thermoreflection thermal insulation materials in buildings.
|
guest ::
